Free UK Mainland Delivery*
Free Returns within 365 Days
Over 25 years experience
A combination sticky tack mat that is half rubber frame for using adhesive inserts (one pack of 60 supplied) and half our Waterhog Classic mat. The Classic mat removes larger particles whilst the adhesive insert captures over 90% of smaller dirt and dust.
Clean Stride Dual Sticky Tack Mats
A highly effective combination mat that acts as a dirt, moisture and dust stopper in one. Ideal for protecting sensitive areas and floors found in sports halls, industry and healthcare for example.
Consisiting of a Waterhog Classic Bi-level Entrance Mat joined together with our Clean Stride Adhesive Tack Mat. The entrance mat will remove dirt and moisture whereas the tack mat will remove finer dirt and dust particles from footwear or wheeled traffic passing over the mats.
CAUTION: The Clean Stride Adhesive Insert becomes slippery when wet and should not be placed where it will be exposed to rain or excessive moisture. If the Clean Stride insert gets wet, remove it from use, and thoroughly wipe dry with a cloth or paper towel.
The Clean Stride Adhesive Inserts and the replacement mats should be used (and stored flat) in temperatures not in excess of 49C (120F) or below 13C (55F).
The insert may wrinkle, due to moisture or direct sunlight exposure, however the wrinkles will not affect the performance of the insert.
Not recommended for use in areas exposed to grease or petroleum products.
Demonstrating the Effectiveness of a Bi-level Waterhog Mat:
An effective entrance mat will remove dirt and moisture from shoes as it is walked over. It will hold onto the dirt and moisture to prevent it being tracked off the mat and into the building as subsequent people walk over the mat. This video demonstrates the performance levels of two differently constructed entrance mats. One is a standard 'carpeted top' mat, whilst the other is a Waterhog Bi-Level mat. The viewer will be able to determine which is the most effective type of entrance door mat for their use.
CLICK ON THE IMAGE ABOVE TO VIEW THE VIDEO
A. Carpet and rubber frame. One pack of 60 Clean Stride Adhesive Inserts supplied. These are also sold separately on this website. Also available as Clean Stride Adhesive which comes without the Waterhog Classic mat half.
B. Clean Stride mat provides a highly effective dirt and dust removal method for factories, computer rooms, clean rooms, warehouses, school gymanasiums, healthcare facilities and more.
C. As foot traffic passes over the mat, the Waterhog Classic surface scrapes larger particles while the adhesive insert captures smaller dust and dirt particles, stopping them from being tracked further.
D. With two footsteps on Clean Stride adhesive insert, over 90% of dirt particles are removed.
E. The Clean Stride adhvesive insert is comprised of 60 layers of adhesive coated film. Each layer will perform many times before it is peeled away. Each layer is numbered to ensure one sheet at a time is removed and to indicate the remaining layers.
F. Green friendly rubber backing has 10%-15% recycled rubber content. Smooth backing for hard floors.
G. Waterhog Classic side is certified Slip Resistant by the National Floor Safety Institute. Click to view: NFSI Certificate
H. For complete features and benefits of the Waterhog Classic side of mat click to view this product: Waterhog Classic
|Backing||SBR Rubber - Smooth backing for hard floors|
|Size variation||+/- 2%|
Cleaning is easy! On the Waterhog Classic side simply use vacuum cleaner and extraction cleaner methods or hose off with water and hang to dry. On the adhesive side the dirty layer is peeled off to leave a clean, fresh layer beneath.
- Clean Rooms